DRMFG fiber cutting blade:
1. DR fine tungsten steel, HRA ≥ 92.5
2. The blade can rotate 12 to the transfer
3. The average cutting life of each knife is about 3,000 times
4. Cut angle <0.5 degrees
5, 400 times the size of the full inspection of the microscope of the microscope
6. Stable quality, export to many countries.
7. Made in ten years to serve the world.
Product Features:
Cutting angle stable
Extension of cutting life
Easy to replace blade
Low temperature cutting is normal
There are many failure reasons for optical fiber cutting and melting.
The common factors are:
1. An impurities sticky on the blade or fiber;
2. The cutting angle is not vertical, reinstall and debug;
3. The blade is too far away, and the depth of cutting is insufficient. You need to reinstall it.
4. Naked fiber coating layer is not peeled off cleanly.
DRMFG
ChatNow